Canyon 2WD L4-2.9L (2008)
6. Clean the mounting surfaces of the body side hinges with a clean rag and mark the rear door hinge locations with a grease pencil or other suitable
marker.
7. Remove the bolts retaining the body side hinges to the body.
8. Remove the hinges from the body.
Installation Procedure
1. Position the body side rear door hinge to the alignment marks.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolts retaining the body side door hinge to the body.
Tighten the body side rear door hinge bolts to 25 N.m (18.4 lb ft).