Canyon 2WD L4-2.9L (2008)
Rear Door Panel: Service and Repair
Rear Side Door Trim Panel Replacement
Rear Side Door Trim Panel Replacement
Tools Required
J 9886-01 Door Handle Clip Remover
Removal Procedure
1. Remove the window regulator handle from the door by inserting tool J 9886-01 between the handle and the white plastic washer to remove the
retaining clip, if the vehicle is equipped with manual windows.
2. Remove the retaining screw from the door handle bezel.
3. Remove the 2 retaining screws from the armrest.