Canyon 2WD L4-2.9L (2008)
2. Close the front and rear door, as necessary.
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Open the rear door.
2. Remove the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair) .
3. Remove the rear door opening weatherstrip (2) from the door opening pinchweld flange (1).
4. Remove the rear door opening weatherstrip from the vehicle.
Installation Procedure