Canyon 2WD L4-2.9L (2008)
7. Remove the bolts attaching the hood release handle to the knee bolster.
8. Remove the cable from the release handle.
9. Pull the cable the rest of the way through the cowl panel and out from behind the sound insulation.
10. Detach the mechanic's wire from the cable, leaving the wire in position for aid in installation of the cable.
11. Remove the cable from the vehicle.
Installation Procedure
1. Attach the mechanic's wire to the exterior end of the cable.
2. Using the mechanic's wire as an aid, guide the cable underneath the sound insulation and pass the exterior portion of the cable through the cowl
panel.
3. Install the cable to the release handle.
4. Seat the cable grommet (1) to the cowl panel.