Canyon 2WD L4-2.9L (2008)
2. Remove the 3 screws (2) located on the lower hinge.
3. Remove the hinge from the vehicle.
Installation Procedure
1. Position the hinge to the console.
Notice: Refer to Fastener Notice.
2. Install the 3 screws (2) retaining the armrest to the lower hinge.
Tighten the screws to 1.5 N.m (15 lb in).
3. Install the armrest. Refer to Front Floor Console Armrest Replacement (See: ) .
Front Floor Console Storage Tray Replacement
Front Floor Console Storage Tray Replacement
Removal Procedure