Canyon 2WD L4-2.9L (2008)
Sun Visor: Service and Repair
Sunshade Replacement
Removal Procedure
1. Remove the 2 screws and washers (4) securing the sunshade (1) to the roof.
2. Remove the sunshade assembly.
3. Remove the screw and washer (3) securing the sunshade retainer (2) to the roof.
4. Remove the sunshade retainer.
Installation Procedure
1. Install the sunshade retainer.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the screw and washer (3) securing the sunshade retainer (2) to the roof.
Tighten the sunshade retainer screw to 1.2 N.m (10 lb in).
3. Install the sunshade assembly to the roof with 2 screws and washers.
Tighten the sunshade screws to 1.2 N.m (10 lb in).