Canyon 2WD L4-2.9L (2008)
5. Remove the head restraint guides from the seat back frame by pinching the tabs on the guides and pulling the guides out of the frame.
6. Remove the seat back latch assembly. Refer to Rear Seat Back Latch Replacement (See: Seat Latch/Service and Repair) .
7. Remove the bolt securing the seat back frame to the seat cushion frame.
8. Remove the seat back frame by pulling the frame off the seat cushion frame stud.
9. Inspect the white nylon bushing on the seat back frame for wear or damage and replace if necessary.
Installation Procedure
