Canyon 2WD L4-2.9L (2008)
18. Disconnect the wire harness for the lumbar and seat heat switches and pull the harness (2) back through the hole in the seat cushion frame.
19. Remove the 4 nuts (1) securing the seat cushion frame to the seat adjuster.
20. Remove the seat cushion frame.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the seat cushion frame to the seat adjuster with 4 nuts (1).
Tighten the front seat cushion frame mounting nuts to 24 N.m (18 lb ft).
2. Route the wire harness for the lumbar and seat heat switches through the hole in the seat cushion frame and connect the connectors.
3. Install the assist spring.
4. Install the seat cushion foam pad and cover to the frame.
5. Install the seat belt buckle assembly (1) through the seat cushion pad.
6. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten the front seat belt buckle bolt to 55 N.m (41 lb ft).
