Canyon 2WD L4-2.9L (2008)
![background image](/gmc/canyon_2wd/l4-2.9l/Page-2281002.png)
5. Unclip the front, rear, and side J-strips (1, 2) on the underside of the seat.
6. Remove the lumbar knob by pulling the knob straight away from the seat, if equipped.
7. Remove the seat switch bezel, if equipped. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement) .
8. Remove the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver Seat and
Passenger Seat Recliner Handle Replacement) .
9. Remove the 2 bolts (1) securing the seat recliner to the seat adjuster.
10. Remove the seat back assembly from the seat cushion assembly.