Canyon 2WD L4-2.9L (2008)
13. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.
14. Install the 3 bolts (1) securing the cupholder bracket to the seat frame, if equipped.
Tighten the front seat cupholder bracket bolts to 9.1 N.m (80 lb in).
15. Install the front seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion Outer Trim Panel
Replacement) .
16. Install the cupholder to the seat by pushing it straight onto the bracket.