Canyon 2WD L4-2.9L (2008)
6. Remove the bolts retaining the latch/support cable assembly to the endgate.
7. Remove the latch assembly from the endgate.
Installation Procedure
1. Install the latch/support cable assembly to the endgate, ensuring the latch rod is oriented correct to the endgate handle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolts retaining the latch assembly to the endgate.
Tighten the latch/support cable assembly bolts to 25 N.m (18 lb ft).