Canyon 2WD L4-2.9L (2008)
Tailgate Release Handle: Service and Repair
Endgate Handle Replacement
Removal Procedure
1. Remove the endgate cover. Refer to Pickup Box Endgate Latch Cover Replacement (See: Tailgate Interior Trim Panel/Service and Repair) .
2. Disconnect the clips (1) retaining the endgate latch rods (2) to the endgate handle.
3. Remove the endgate latch rods (2) from the retaining clips (1).
4. Remove the bolts retaining the endgate handle to the endgate.
5. Remove the endgate handle from the endgate.
6. Remove the lock cylinder from the endgate handle if equipped. Refer to Endgate Lock Cylinder Replacement (See: Locks/Door Locks/Door Lock
Cylinder/Service and Repair) .
Installation Procedure