Canyon 2WD L4-2.9L (2008)
1. Install the sensor to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the 2 retaining nuts.
Tighten the screws to 9 N.m (80 lb in).
3. Install the electrical connector to the sensor.
4. Install the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat
Replacement - Bucket) or Split Bench Seat Replacement (See: Body and Frame/Seats/Service and Repair/Split Bench Seat Replacement) .
