Canyon 2WD L4-2.9L (2008)
3. Remove the balance shaft chain tensioner bolts.
4. Remove the balance shaft chain tensioner.
Installation Procedure
1. Collapse the balance shaft chain tensioner using the following procedure:
1. Rotate the ratchet release lever (2) clockwise and hold.
2. Collapse the tensioner shoe (1) and hold.
3. Release the ratchet lever.
2. Slowly release the pressure on the shoe, until the ratchet lever moves to the first detent and a "click" is heard and felt.
3. Insert a pin through the hole in the release lever in order to lock the tensioner shoe in the collapsed position.