Canyon 2WD L4-2.9L (2008)
1. Install the crankshaft balancer using the EN-48034 .
2. Remove the EN-48034 .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the crankshaft balancer washer and NEW bolt.
Tighten the bolt to 150 N.m (111 lb ft) plus an additional 180 degrees using the J 45059 .
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).