Canyon 2WD L4-2.9L (2008)
5. Remove the bolts securing engine lift bracket to the engine.
6. Remove the engine lift bracket from the engine.
Installation Procedure
1. Position the engine lift bracket to the engine.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the bolts securing engine lift bracket to the engine.
1. Tighten the bolts in sequence to 5 N.m (44 lb in).
2. Tighten the bolts in sequence to 50 N.m (37 lb ft).
3. Position the generator to the engine.