Canyon 2WD L4-2.9L (2008)
![background image](/gmc/canyon_2wd/l4-2.9l/Page-560001.png)
Oil Filter Adapter: Service and Repair
Oil Filter Adapter Replacement
Oil Filter Adapter Replacement
Removal Procedure
1. Remove the oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair).
2. Disconnect the engine wiring harness electrical connector (2) from the oil pressure switch (1).
3. Disconnect the engine wiring harness retainer (3) from the oil filter adapter (4).
4. Remove the engine oil pressure switch, if necessary. Refer to Engine Oil Pressure Sensor and/or Switch Replacement (See: Oil Pressure
Sensor/Service and Repair).
5. Remove the oil filter adapter bolts.
6. Remove the oil filter adapter from the engine block.
Installation Procedure