Canyon 2WD L4-2.9L (2008)
1. Install the blower motor (3).
2. Connect the blower motor electrical connector (4).
3. Install the blower motor cooling tube (2).
Notice: Refer to Fastener Notice.
4. Install the blower motor mounting screws.
Tighten the screws to 2 N.m (18 lb in).
5. Install the right hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Right Side (See: Body and Frame/Interior Moulding
/ Trim/Trim Panel/Service and Repair) .