Canyon 2WD L4-2.9L (2008)
3. Remove the rear axle fill plug.
4. Remove the rear axle cover. Refer to Rear Axle Housing Cover and Gasket Replacement (See: Transmission and Drivetrain/Differential
Assembly/Differential Cover/Service and Repair) .
5. Drain the lubricant into a suitable container.
Installation Procedure
1. Install the rear axle cover. Refer to Rear Axle Housing Cover and Gasket Replacement (See: Transmission and Drivetrain/Differential
Assembly/Differential Cover/Service and Repair) .
2. Fill the rear axle with axle lubricant. Use the proper fluid. Refer to Approximate Fluid Capacities (See: Service Intervals) and Adhesives, Fluids,
Lubricants, and Sealers () .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the rear axle fill plug.
Tighten the rear axle fill plug to 33 N.m (24 lb ft).
