Canyon 2WD L4-2.9L (2008)
4. Remove the evaporator tube from the retaining clips (1) on the fender.
5. Remove the grille. Refer to Grille Replacement (See: Body and Frame/Grille/Service and Repair) .
6. Remove the evaporator tube retaining clip from the condenser.
7. Remove the evaporator tube attaching bolt (1) at the receiver dehydrator.
8. Remove the evaporator tube.
9. Remove the O-ring seal and discard.
Installation Procedure
1. Install the new O-ring seal. Refer to O-Ring Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C Coupler O-ring/Service and
Repair/O-Ring Replacement) .
2. Install the evaporator tube.