Canyon 2WD L4-2.9L (2008)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
1. Remove the fuel tank module. Refer to Fuel Tank Module Replacement (See: Fuel Delivery and Air Induction/Fuel Tank Unit/Service and Repair
) .
2. Disconnect the fuel level sensor electrical connector from the module cover.
3. Disengage the locking tab (1) on the module bucket.
4. Slide the fuel level sensor downward off from the module bucket.
Installation Procedure
1. Align the edges of the fuel level sensor with the slots in the module bucket.
2. Slide the fuel level sensor into position, ensure the locking tab (1) is fully engaged.