Canyon 2WD L4-2.9L (2008)
![background image](/gmc/canyon_2wd/l4-2.9l/Page-1047001.png)
Catalyst Shield: Service and Repair
Catalytic Converter Heat Shield Replacement
Removal Procedure
Caution: Refer to Exhaust Service Caution (See: Engine, Cooling and Exhaust/Exhaust System/Service Precautions) .
Caution: Refer to Protective Goggles and Glove Caution (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning) .
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the 5 nuts securing the heat shield to the floor panel.
3. Remove the catalytic converter heat shield from the floor panel.
Installation Procedure