Canyon 2WD L4-2.9L (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
Evaporative Emission Hoses/Pipes Replacement - Engine
Removal Procedure
Caution: Refer to Fuel and Evaporative Emission Pipe Caution (See: Service Precautions/Technician Safety Information/Fuel and Evaporative
Emission Pipe Caution) .
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel Delivery and Air Induction/Fuel/Service Precautions/Gasoline/Gasoline Vapors
Caution) .
Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice (See: Service Precautions/Vehicle Damage Warnings) .
1. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar
Quick Connect Fitting Service) in order to disconnect the evaporative emission (EVAP) hose from the following:
*
The throttle body assembly (2)
*
The EVAP canister purge solenoid valve (3)
2. Remove the EVAP hose (1) from the engine.
Installation Procedure
1. Position the EVAP hose (1) to the engine.
2. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar
Quick Connect Fitting Service) in order to connect the EVAP hose to the following:
*
The throttle body assembly (2)