Canyon 2WD L4-2.9L (2008)
Fuel Filler Hose: Service and Repair
Fuel Tank Filler Hose Replacement
Removal Procedure
1. Partially drain the fuel tank below the level of the fuel fill hose. Refer to Fuel Tank Draining (See: Service and Repair) .
2. Raise and support the vehicle, high enough to access the fuel fill hose through the wheelhouse liner. Refer to Lifting and Jacking the Vehicle (See:
Maintenance/Vehicle Lifting/Service and Repair) .
3. Remove the left pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair) .
4. Remove the fuel fill hose ground strap bolt.
5. Remove the ground strap from the frame.
6. Loosen the fuel fill hose clamp (2) at the fuel tank.
7. Disconnect the fuel tank evaporative emission (EVAP) line (1) quick connect fitting from the fill tube vent line. Refer to Plastic Collar Quick
Connect Fitting Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
8. Separate the fuel fill hose from the fuel tank.