Canyon 2WD L4-2.9L (2008)
Transmission Position Switch/Sensor: Service and Repair
Park/Neutral Position and Backup Lamp Switch Replacement
Tools Required
J 41364-A Park Neutral Switch Aligner
Removal Procedure
1. Apply the parking brake.
2. Shift the transmission into NEUTRAL.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
4. Remove the nut securing the transmission control lever to the manual shaft.
5. Remove the transmission control lever from the manual shaft.