Canyon 2WD L4-2.9L (2008)
Power Steering Pump Seal: Service and Repair
Power Steering Pump Shaft Seal Replacement
Removal Procedure
1. Remove the power steering pump from the vehicle, if necessary. Refer to Power Steering Pump Replacement (See: Service and Repair) .
Important: Protect the drive shaft with the shim stock.
2. Use a small chisel in order to remove the seal.
Discard the seal.
Installation Procedure
1. Lubricate the new drive shaft seal using power steering fluid.
2. Use a deep socket in order to install the new drive shaft seal.
3. Install the power steering pump, if removed. Refer to Power Steering Pump Replacement (See: Service and Repair) .