Canyon 2WD L4-2.9L (2008)
Clutch Slave Cylinder: Service and Repair
Clutch Actuator Cylinder Replacement
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (RWD) (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transmission Replacement (RWD))Transmission Replacement (4WD) () .
2. Remove the 2 clutch actuator cylinder bolts (3).
3. Remove the clutch actuator cylinder (1) from the input shaft bearing retainer (2).
Installation Procedure
1. Position the clutch actuator cylinder (1) to the input shaft bearing retainer (2).
