Canyon 2WD L4-2.9L (2008)
5. Remove the TCC PWM solenoid retainer with a small screwdriver. Rotate the solenoid in the bore, if necessary, until the flat part of the retainer is
visible.
6. Remove the TCC PWM solenoid in order to access one of the TCC solenoid retaining bolts.
7. Remove the pressure control solenoid retainer.
8. Remove the pressure control solenoid.
9. Remove the TCC solenoid retaining bolts.
10. Using the J 28458, release the pass-through electrical connector from the transmission case.
1. Use the small end of the J 28458 over the top of the connector.
2. Twist in order to release the four tabs retaining the connector.