Canyon 2WD L4-2.9L (2008)
1. Install the front window regulator motor to the regulator.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolts retaining the front window regulator motor to the regulator bracket.
Tighten the front window regulator motor bolts to 4.5 N.m (40 lb in).
3. Remove the nut and bolt securing the lift arm to the regulator bracket.
4. Install the front window regulator to the front door. Refer to Rear Side Door Window Regulator Replacement (See: Window Regulator/Rear Door
Window Regulator/Service and Repair) .