Canyon 2WD L4-2.9L (2008)
7. Disengage the coolant recovery hose clips from the fender flange.
8. Remove the washer solvent container / coolant recovery reservoir (1) from the engine compartment.
9. Drain the washer solvent and engine coolant into separate suitable containers.
10. Place the washer solvent container / coolant recovery reservoir onto a clean bench top.
11. Remove the following component parts:
*
Coolant container overflow hose (1)
*
Coolant recovery reservoir cap (2)
*
Windshield washer container cap (3)
*
Coolant recovery to radiator hose (4)
*
Windshield washer pump and grommet (5)
*
Windshield washer container lower grommet (6)
12. Discard the washer solvent container / coolant recovery reservoir (7).