Canyon 2WD L5-3.5L VIN 6 (2004)
2. Remove the 3 screws (2) located on the lower hinge.
3. Remove the hinge from the vehicle.
Installation Procedure
1. Position the hinge to the console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 3 screws (2) retaining the armrest to the lower hinge.
Tighten the screws to 1.5 N.m (15 lb in).
3. Install the armrest.
Console Replacement (Long Console)
Console Replacement (Long Console)
Removal Procedure
1. For regular cab vehicles, remove the passenger front bucket seat. Refer to Seat Replacement - Front Bucket in Seats.
2. For regular, extended and crew cab vehicles, remove the front bucket seat fasteners retaining the floor console to the floor. Refer to Seat
Replacement - Front Bucket in Seats.
3. If the vehicle is equipped with a floor mounted shift lever, remove the shift lever bezel and boot. Refer to Console Shift Lever Bezel Replacement.