Canyon 2WD L5-3.5L VIN 6 (2004)
10. Install the 2 bolts (1) securing the seat recliner to the seat adjuster.
Tighten
Tighten the front seat recliner bolts to 24 N.m (18 lb ft).
11. Install the lumbar adjustment mechanism (1) to the seat adjuster with the 2 screws (2).
12. Install the lumbar cable to the lumbar adjustment mechanism.
13. Install the seat switch bezel, if equipped.
14. Install the lumbar knob by pushing the knob straight onto the shaft, if equipped.
15. Install the recliner handle.
16. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.
