Canyon 2WD L5-3.5L VIN 6 (2004)
Truck Bed: Service and Repair
Pickup Box Assembly Replacement - Side
Pickup Box Assembly Replacement - Side
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution in Service Precautions.
1. Remove the box assembly.
2. Remove the end gate.
3. Remove the wheelhouse liner.
4. Remove the tail lamp.
5. Restore as much damage as possible.
6. Note the location and remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and
Repair in Paint/Coatings.
7. Note the location of all spot welds to be drilled out.
8. Locate and drill out spot welds on the inside of the panel.