Canyon 2WD L5-3.5L VIN 6 (2004)
Rear Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Rear Door Opening
Weatherstrip Replacement - Rear Door Opening
Removal Procedure
1. Open the rear door.
2. Remove the lower center pillar trim panel.
3. Remove the rear door opening weatherstrip (2) from the door opening pinchweld flange (1).
4. Remove the rear door opening weatherstrip from the vehicle.
Installation Procedure
1. Position the rear door opening weatherstrip to the pinchweld flange.
2. Starting at the upper rear corner, press the rear door opening weatherstrip (2) onto the pinchweld flange (1) until it is fully seated.