Canyon 2WD L5-3.5L VIN 6 (2004)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Component Notice in Service Precautions.
1. Remove the master cylinder from the vehicle. Refer to Brake Fluid Effects on Paint and Electrical Component Notice in Service Precautions.
2. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only at the flange.
3. Carefully remove the brake master cylinder reservoir retaining pins.
4. Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder.
5. Remove the seals from the master cylinder.
Installation Procedure