Canyon 2WD L5-3.5L VIN 6 (2004)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner Replacement
Removal Procedure
1. Remove the drive belt.
2. Inspect the drive belt. Change the drive belt as necessary.
3. Using a wrench loosen and remove the drive belt tensioner bolt.
4. Remove the drive belt tensioner.
Installation Procedure
1. Install the drive belt tensioner.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt tensioner bolt.
^
Tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).
3. Install the drive belt Drive.