Canyon 2WD L5-3.5L VIN 6 (2004)
Alignment: Service and Repair
Front Wheel Alignment
Front Caster and Camber Adjustment
^
Tools Required
-
J 45938,Alignment Socket
1. The caster and camber adjustments are made by rotating the offset cam bolt and the cam in the slotted frame bracket in order to reposition the
control arm.
Important: Before adjusting the caster and camber angles, jounce the front bumper three times to allow the vehicle to return to normal height.
Measure and adjust the caster and the camber with the vehicle at curb height. The front suspension Z dimension is indicated in Trim Heights. Refer to
Trim Height Specifications.
2. For an accurate reading, do not push or pull on the tires during the alignment process.
3. Determine the caster angle (2). Be sure to compensate for frame angle where required.
4. Determine the positive camber (2) or negative camber (3) angle.