Canyon 2WD L5-3.5L VIN 6 (2004)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the TCC solenoid retaining bolts.
^
Tighten the TCC solenoid retaining bolts to 11 Nm (97 inch lbs.).
4. Install the pressure control solenoid. Ensure that the electrical connection is facing downward.
5. Install the pressure control solenoid retainer and retaining bolt.
^
Tighten the pressure control solenoid retaining bolt to 11 Nm (97 inch lbs.).
6. Install the TCC PWM solenoid to the control valve body.
7. Install the TCC PWM solenoid retainer.