Canyon 2WD L5-3.5L VIN 6 (2004)
4. Pull rearward on the trim panel to release the retaining clips.
The trim panel will be tethered to the vehicle by the park brake release cable.
5. Use a flat-bladed tool to remove the park brake release handle from the park brake release cable. Release the retaining tabs located behind the
handle.
6. In order to remove the cable from the trim panel, reach behind the panel and rotate the cable clockwise past the molded bumps (1).
7. Remove the trim panel from the vehicle.
INSTALLATION PROCEDURE
1. Position the trim panel to the instrument panel (I/P).
2. In order to install the cable to the trim panel, insert the cable into the trim panel and rotate the cable counterclockwise past the molded bumps (1),
until seated.