Canyon 2WD L5-3.5L VIN 6 (2004)
4. Install the lower center pillar trim panel.
5. Install the front seat belt anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the front seat belt anchor bolt to 52.5 N.m (39 lb ft).
6. Install the front seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the front seat belt upper guide bolt to 52.5 N.m (39 lb ft).
7. Install the front seat belt upper guide shoulder bolt trim cover.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 and SIR Disabling and Enabling Zone 6 in Restraint Systems.