Canyon 2WD L5-3.5L VIN 6 (2004)
6. Press the locking tabs inward in order to remove the underhood fuse block cover from the underhood fuse block.
7. Remove the nut (3) securing the battery positive cable (4) to the underhood fuse block (1).
8. Remove the battery positive cable (4) from the upper portion of the battery cables harness conduit (6).
9. Raise and support the vehicle only high enough to access the remainder of the cable through the wheelhouse. Refer to vehicle Lifting.
10. Remove the left wheelhouse liner.
11. Remove the starter terminal nut (1) and disconnect the battery positive cable (2) from the starter.
12. Open the battery cables harness retainer (5) at the engine wiring harness bracket (1).
13. Remove the battery positive cable (2) from the battery cables harness conduit (6).
Installation Procedure
