Canyon 2WD L5-3.5L VIN 6 (2004)
Pressure Regulating Solenoid: Service and Repair
Pressure Regulator Replacement
Removal Procedure
1. Remove the transmission oil pan and filter.
2. Compress and hold the reverse boost valve sleeve into the bore of the oil pump to release tension on the reverse boost valve retaining ring.
3. Remove the reverse boost valve retaining ring, then slowly release tension on the reverse boost valve sleeve.
4. Remove the following from the oil pump:
4.1.
The reverse boost valve sleeve (5).
4.2.
The reverse boost valve (4).
4.3.
The pressure regulator isolator spring (3).
4.4.
The pressure regulator valve spring (2).
4.5.
The pressure regulator valve (1).
Installation Procedure
