Canyon 2WD L5-3.5L VIN 6 (2004)
3. Install new seals on the servo pistons and the servo cover.
4. Install the 2-4 servo assembly into the transmission.
5. Install the J 29714-A to the transmission oil pan flange.
6. Tighten the bolt in order to compress the servo cover.
7. Install the servo cover retaining ring.
8. Remove the J 29714-A.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the oil pan bolt.
^
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
10. Install the front propeller shaft (4WD only).
11. Lower the vehicle.
12. Fill the transmission to the proper level with DEXRON'5 III transmission fluid.