Canyon 2WD L5-3.7L (2007)
![background image](/gmc/canyon_2wd/l5-3.7l/Page-2070003.png)
5. Install the release handle to the knee bolster.
Notice: Refer to Fastener Notice.
6. Install the bolts that retain the release handle to the knee bolster.
Tighten the bolts to 1 N.m (9 lb in).
7. Route the cable as previously noted.
8. Attach the cable to the retainers on the inner fender.
9. Install the cable to the hood latch assembly.
10. Install the hood latch.
11. Install the grille.