Canyon 2WD L5-3.7L (2007)
4. Press the decal to the painted surface while continuing to remove the backing.
5. Hand roll the decal to the panel to ensure proper adhesion.
6. Inspect the decal for bonding.
7. Remove the tape from the area around the decal.
8. Install the tail lamp.
Radiator Grille Emblem Replacement
Radiator Grille Emblem Replacement
Removal Procedure
1. Remove the grille.
2. Place the grille on a clean, prepared surface.
3. Remove the emblem retaining nuts.
4. Remove the emblem from the grille.
Installation Procedure
1. Install the emblem to the grille.
Notice: Refer to Fastener Notice.
2. Install the nuts that retain the emblem to the grille.
Tighten the nuts to 3 N.m (27 lb in).
3. Install the grille.