Canyon 2WD L5-3.7L (2007)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement
Heater Inlet Hose Replacement
Tools Required
*
J38185 Hose Clamp Pliers
*
J43181 Heater Line Quick Connect Release Tool
Removal Procedure
1. Drain the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
2. Using the J43181, release the inlet heater hose quick connect (1) from the heater core inlet.
3. Position the inlet heater hose clamp (4) at the engine block using J38185.
4. Remove the heater inlet hose (3) from the inlet hose fitting (6) at the engine block.
5. Remove the heater inlet hose (3).
Installation Procedure