Canyon 2WD L5-3.7L (2007)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position Exhaust Actuator Replacement
Tools Required
*
J 44217 Timing Chain Retention Tool
*
J-44217-45 Chain Holding Tool
*
J 44221 Camshaft Holding Tool
*
J 45059 Angle Meter
Removal Procedure
1. Remove the camshaft cover.
2. Ensure the exhaust CMP actuator is functioning properly. Refer to Camshaft Position Actuator Diagnosis.
3. Remove the exhaust CMP sensor.
4. Remove the intake CMP sensor.
5. Rotate the crankshaft in the engine rotational direction clockwise, until the #1 piston is at top dead center (TDC) on the compression stroke.
The word Delphi on the exhaust camshaft position actuator will be parallel with the cylinder head to cam cover mating surface.
6. Using the timing mark on the exhaust camshaft position actuator sprocket as a reference, make a mark on the timing chain link adjacent to it.