Canyon 2WD L5-3.7L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank
Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank
Removal Procedure
Caution: Refer to Fuel and Evaporative Emission Pipe Caution.
Caution: Refer to Gasoline/Gasoline Vapors Caution.
Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Refer to Plastic Collar Quick Connect Fitting Service in order to disconnect the evaporative emission (EVAP) hoses (1, 3) from the following:
* The EVAP canister (5)
* The vent valve
3. Disengage the EVAP hose (3) from the retaining clip on the fuel tank.
Installation Procedure
1. Secure the EVAP hose (3) to the retaining clip on the fuel tank.
2. Refer to Plastic Collar Quick Connect Fitting Service in order to connect the EVAP hoses (1, 3) to the following:
* The EVAP canister (5)