Canyon 2WD L5-3.7L (2007)
Window Handle: Service and Repair
DOOR WINDOW REGULATOR HANDLE REPLACEMENT
TOOLS REQUIRED
J 9886-01 Door Handle Clip Remover
REMOVAL PROCEDURE
1. Raise the window to the full up position.
2. Remove the window regulator handle from the door by inserting tool J 9886-01 between the handle and the white plastic washer.
3. Align the J 9886-01 with the handle.
4. Push the J 9886-01 in order to disengage the clip.
5. Pull the handle from the door.
6. Remove the window regulator handle from the door.
7. Remove the bearing plate from the door.
INSTALLATION PROCEDURE