Canyon 2WD L5-3.7L (2007)
8. Remove the inside rear view mirror (4).
9. IMPORTANT: The upper window reveal molding fills the cavities between the body and window. If the reveal molding is stretched or damaged,
it cannot be reused. It must be replaced.
Remove the upper window reveal molding. If the upper window reveal molding will not release, it must be replaced.
10. IMPORTANT: The window lower supports (1) have molded in locks with an urethane adhesive strip (2) on the back side. Once the window
lower stop have been removed they must be replaced.
Remove the window lower supports (1) by using a flat-bladed tool, lightly prying upward in the middle until it releases.
11. IMPORTANT: Keep the cutting edge of the tool against the window.
This will allow the urethane adhesive to be separated from the window.
-
Leave a base of urethane on the pinch-weld flange.
-
The only suitable lubrication is clear water.